Discount Accessories & Electronics for Geeks!
Wilson Dual-Band NMO Mount Antenna 301104 Wilson Dual-Band NMO Mount Antenna 301104 
The Wilson NMO Outperforms the Competition. Engineered and
Made in the USA No Tax & Free Shipping available
in USA.Up to 90% of the power on both transmit
and receive is absorbed within a vehicle and the users
head. We solve this problem by channeling all the power
from the cellphone to the outside antenna. This results in
our NMO antenna transmitting and receiving over 10 times more
signal than a cellphone used inside the vehicle without an
outside antenna. The Wilson NMO Cellular Antenna was carefully
designed to minimize loss and maximize gain on both the
800 MHz and 1900 MHz bands. Wilson accomplished this by
using a phasing coil and a low loss coaxial phase
reversing device that provides high gain on both frequencies. Wilson's
innovative design results in high efficiency with low losses and
will get the most signal to your cellular phone. Thanks
to these innovations and our attention to detail Wilson Electronics
has the best performing NMO cellular antenna available. Usage
The Wilson NMO Cellular Antenna requires a standard NMO
mount (sold separately) and a phone adapter (also sold separately).
Most NMO mounts are installed by drilling a hole in
the roof of your vehicle. The cable is then routed
under the headliner to the cellphones location. This provides for
an excellent ground plane and very solid permanent installation.
Specifications Electrical Properties: Part #: 301104 Frequency Range:
806-894 MHz / 1850-1990 MHz Impedance: 50 Ohms / Both
Bands Antenna Gain: 4.9dBi 806-894MHz / 5.9dBi 1850-1990MHz System Gain:
10-15dB Radiation: Omni Polarization: Vertical Wavelength: 1 @ 806-894MHz /
2.1 @ 1850-1990MHz Ground Plane: Metal Ground Plane is Required
Mechanical Properties: Material.....Whip - Stainless Steel Height.......................13.88" Mounts..............NMO
Mount Types (sold separately) Wilson NMO Cellular Antenna Installation Instructions
Antenna Installation Select a location for mounting
the antenna. The best location would be centered on the
roof, although other locations are acceptable. Drill a
hole in the selected location. Hole size will depend on
the size of the NMO mount purchased. Route
the cable between the hole and phone location.
Place the NMO mount up through the bottom of the
hole. Place threaded nut on top of the mount, outside
of vehicle, and tighten. Screw antenna coil into
place on top of vehicle. Screw FME connectors
together between antenna mount cable and antenna adapter and connect
adapter to cell phone. Attaching your Phone to the
Adapter (Sold Separately) In order to attach you cellular antenna
to your cellphone you will need an Adapter. The
Adapter connects the phone to the antenna cable and transfers
power to and from the antenna. Click HERE for a
list of available antenna adapters. FAQs - Click
Here for more information on Antennas and Amplifiers.
Price: $24.99 |
|